Products
Home Steel frame building materials Oem Galvanized Ceiling Seismic Clip

Oem Galvanized Ceiling Seismic Clip

The seismic clip will accept standard H&B Wire Ties and Continuous Wire. Horizontal Joint Reinforcement Wire and Masonry Tie are snapped into the seismic clip and fully surrounded by mortar. This allows all components to function integrally as a single unit.


  • Product Origin:

    Hangzhou, China
  • Lead Time:

    Within 2 Weeks
  • Product Detail

Oem Galvanized Ceiling Seismic Clip

Wind resistance connect parts, normally, used in connection the wall and truss with thin flat or round head washer drlling screw, Wind resistance connect parts used in the outsides wall is better and prevent the inner wall uneven. There are no other parts on both sides of the connecting truss and the upper of the wall, the outer hexagonal drill tail screw can be used to fix it, and the screw be full is better.

A  wall – B wall – Truss LGS – Wind resistance connect parts



The original truss connector is divided into two pieces (left and right). Now, most of them only buy one (left) part, and sometimes they can not be used because some parts space cannot be connected to LGS. Refer to the different use place, choose to use different type truss connect parts and the effect is better.



Model:KF160-20

Dimensions:160*40*2.0(mm)

Material:  Q345 (Grade: SGH340 – Z275)

Zinc layer:  2 sides 275 g/M2


Connect the truss and wall

Seismic Joint Clip


Seismic Joint Clip


Custom metal Seismic Clip


Stainless Steel Seismic Clip





Aluminum Seismic Clip


Buildmart Certificate


Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
high quality installing house wrap
Best installing building house wrap for Roof and Wall System

Breather membrane is a vapour permeable and air tight breather membrane, designed for usein both fully supported and unsupported installations in tiled or slate pitch roofs.

asphalt shingle
Single layer 3 tab asphalt roofing shingles types asphalt bundle installation

Roofing shingles are made of asphalt -- a capable roofing material that construction and roadworks developers use. In turn, it can take so much pressure and strain despite being an alternative.

Self Drilling Screws Truss Head Phillips
1 Self Drilling Screws Truss Head Phillips

1 Inch Self Tapping Screw can be drilled, tapped and fastened, all in one swift motion, saving the time and effort that you would have had to put in otherwise.

Phillips Truss Head Self Tapping Screws
Stainless Steel 2 Self Tapping ScrewsTruss Head Phillips

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

Roofing Clip Angle
90 Degree Adjustable Wall & Roof Clip Angle

Durable right angle clamp, made of premium aluminum alloy die-casting material. Allows two wood block of different thicknesses to be joined at a 90 degree angle.

Aluminum Truss Support Clip
Heavy Duty Truss Support Clip

The Truss Support Clip provides a positive connection between the valley truss and the supporting framing below. Installed on top of the roof sheathing, it eliminates the need to add a support wedge under the valley truss or to bevel the bottom chord to match the roof pitch.

Rhomboid connect parts
Rhombus strengthening connect parts

Our Rhomboid connect parts are made of stainless steel,a whole die-casting molding structure,rust and corrosion resistance,strong toughness and load bearing,can use for long time.

roofing moment clip
Wall Vertical moment clip

The moment clips are designed to resist horizontal, torsional and vertical (uplift) loads. These clips are prepunched with a series of attachment holes for steel framing connections and a 1/2” anchor bolt hole for foundation connections.

Galvanized roof joist hangers
Custom Metal Stainless Steel Joist Hangers Roof Hanger

The joist hanger provides a strong connection between a 2x6 floor, ceiling or deck joist and the header. Joist hangers install easily, eliminate the need for toe-nailing and are required by the building code in many areas.

Double Thread Self Tapping Screws
Self Tapping Screws Truss Head Phillips Double Thread

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

Stainless Steel Truss Head Screws
Phillips Flat Head Self-Drilling Screws

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

Stainless Steel Self Drilling Screws
Stainless Steel Hex Washer Head Self Drilling Screws

The Stainless Steel Hex Washer Head Screws are strong, corrosion resistant and will support all of your projects. They are great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications. Stripping a screw head is a thing of the past with our Hex Head screws. Put a socket on that impact or drill and fasten away!

Bugle Head Self-Drilling Screws
Phillips Bugle Head Self Drilling Screws For Metal Studs

All Self Tapping Screws placed in a storage case with removable dividers, which are customizable for any usage.

Flat T-Shape Corner Brace Mending Plate
Flat T-Shape Clip Fastener Strips

The “T” shape Clip of hot rolled steel tee makes it favorable for applications where large loading bearing capabilities are a must. The top (Flange) provides compressive stress resistance while the vertical section (web) resists shear stresses and bending.

© Copyright 2024 Buildmart (Xiamen) Building Material Technology Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #